CCDP TRAINING IN BANGALORE
Networkers Champ is one of the leanding CCDP networking training in Bangalore India.
1.0 Network Principles
- 1.1 Identify Cisco Express Forwarding concepts
- 1.1.a FIB
- 1.1.b Adjacency table
- 1.2 Explain general network challenges
- 1.2.a Unicast
- 1.2.b Out-of-order packets
- 1.2.c Asymmetric routing
- 1.3 Describe IP operations
- 1.3.a ICMP Unreachable and Redirects
- 1.3.b IPv4 and IPv6 fragmentation
- 1.3.c TTL
- 1.4 Explain TCP operations
- 1.4.a IPv4 and IPv6 (P)MTU
- 1.4.b MSS
- 1.4.c Latency
- 1.4.d Windowing
- 1.4.e Bandwidth-delay product
- 1.4.f Global synchronization
- 1.5 Describe UDP operations
- 1.5.a Starvation
- 1.5.b Latency
- 1.6 Recognize proposed changes to the network
- 1.6.a Changes to routing protocol parameters
- 1.6.b Migrate parts of the network to IPv6
- 1.6.c Routing protocol migration
4.0 VPN Technologies
- 4.1 Configure and verify GRE
- 4.2 Describe DMVPN (single hub)
- 4.3 Describe Easy Virtual Networking (EVN)
5.0 Infrastructure Security
- 5.1 Describe IOS AAA using local database
- 5.2 Describe device security using IOS AAA with TACACS+ and RADIUS
- 5.2.a AAA with TACACS+ and RADIUS
- 5.2.b Local privilege authorization fallback
- 5.3 Configure and verify device access control
- 5.3.a Lines (VTY, AUX, console)
- 5.3.b Management plane protection
- 5.3.c Password encryption
- 5.4 Configure and verify router security features
- 5.4.a IPv4 access control lists (standard, extended, time-based)
- 5.4.b IPv6 traffic filter
- 5.4.c Unicast reverse path forwarding
6.0 Infrastructure Services
- 6.1 Configure and verify device management
- 6.1.a Console and VTY
- 6.1.b Telnet, HTTP, HTTPS, SSH, SCP
- 6.1.c (T)FTP
- 6.2 Configure and verify SNMP
- 6.2.a v2
- 6.2.b v3
- 6.3 Configure and verify logging
- 6.3.a Local logging, syslog, debugs, conditional debugs
- 6.3.b Timestamps
- 6.4 Configure and verify Network Time Protocol (NTP)
- 6.4.a NTP master, client, version 3, version 4
- 6.4.b NTP authentication
- 6.5 Configure and verify IPv4 and IPv6 DHCP
- 6.5.a DHCP client, IOS DHCP server, DHCP relay
- 6.5.b DHCP options (describe)
- 6.6 Configure and verify IPv4 Network Address Translation (NAT)
- 6.6.a Static NAT, dynamic NAT, PAT
- 6.7 Describe IPv6 NAT
- 6.7.a NAT64
- 6.7.b NPTv6
- 6.8 Describe SLA architecture
- 6.9 Configure and verify IP SLA
- 6.9.a ICMP
- 6.10 Configure and verify tracking objects
- 6.10.a Tracking objects
- 6.10.b Tracking different entities (for example, interfaces, IPSLA results)
- 6.11 Configure and verify Cisco NetFlow
- 6.11.a NetFlow v5, v9
- 6.11.b Local retrieval
- 6.11.c Export (configuration only)
2.0 Layer 2 Technologies
- 2.1 Configure and verify PPP
- 2.1.a Authentication (PAP, CHAP)
- 2.1.b PPPoE (client side only)
- 2.2 Explain Frame Relay
- 2.2.a Operations
- 2.2.b Point-to-point
- 2.2.c Multipoint
3.0 Layer 3 Technologies
- 3.1 Identify, configure, and verify IPv4 addressing and subnetting
- 3.1.a Address types (Unicast, broadcast, multicast, and VLSM)
- 3.1.b ARP
- 3.1.c DHCP relay and server
- 3.1.d DHCP protocol operations
- 3.2 Identify IPv6 addressing and subnetting
- 3.2.a Unicast
- 3.2.b EUI-64
- 3.2.c ND, RS/RA
- 3.2.d Autoconfig (SLAAC)
- 3.2.e DHCP relay and server
- 3.2.f DHCP protocol operations
- 3.3 Configure and verify static routing
- 3.4 Configure and verify default routing
- 3.5 Evaluate routing protocol types
- 3.5.a Distance vector
- 3.5.b Link state
- 3.5.c Path vector
- 3.6 Describe administrative distance
- 3.7 Troubleshoot passive interfaces
- 3.8 Configure and verify VRF lite
- 3.9 Configure and verify filtering with any protocol
- 3.10 Configure and verify redistribution between any routing protocols or routing sources
- 3.11 Configure and verify manual and autosummarization with any routing protocol
- 3.12 Configure and verify policy-based routing
- 3.13 Identify suboptimal routing
- 3.14 Explain ROUTE maps
- 3.15 Configure and verify loop prevention mechanisms
- 3.15.a Route tagging and filtering
- 3.15.b Split-horizon
- 3.15.c Route poisoning
- 3.16 Configure and verify RIPv2
- 3.17 Describe RIPng
- 3.18 Describe EIGRP packet types
- 3.19 Configure and verify EIGRP neighbor relationship and authentication
- 3.20 Configure and verify EIGRP stubs
- 3.21 Configure and verify EIGRP load balancing
- 3.21.a Equal cost
- 3.21.b Unequal cost
- 3.22 Describe and optimize EIGRP metrics
- 3.23 Configure and verify EIGRP for IPv6
- 3.24 Describe OSPF packet types
- 3.25 Configure and verify OSPF neighbor relationship and authentication
- 3.26 Configure and verify network types, area types, and router types
- 3.26.a Point-to-point, multipoint, broadcast, nonbroadcast
- 3.26.b LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
- 3.26.c Internal router, backbone router, ABR, ASBR
- 3.26.d Virtual link
- 3.27 Configure and verify OSPF path preference
- 3.28 Configure and verify OSPF operations
- 3.29 Configure and verify OSPF for IPv6
- 3.30 Describe, configure, and verify BGP peer relationships and authentication
- 3.30.a Peer group
- 3.30.b Active, passive
- 3.30.c States and timers
- 3.31 Configure and verify eBGP (IPv4 and IPv6 address families)
- 3.31.a eBGP
- 3.31.b 4-byte AS number
- 3.31.c Private AS
- 3.32 Explain BGP attributes and best-path selection
Course Fee
| CCDP Courses | Regular Track | Fast Track | Super Fast Track | Week End’s | Cost in Indian Rupees |
|---|---|---|---|---|---|
| 300-101 ROUTE | 1.5 Months (2hrs) | 20 Days (4hrs) | 10 Days (8hrs) | 6 Weeks (3hrs) | Contact US |
| 300-115 SWITCH | 1.5 Months (2hrs) | 20 Days (4hrs) | 10 Days (8hrs) | 6 Weeks (3hrs) | Contact US |
| 300-320 ARCH | 1.5 Months (2hrs) | 20 Days (4hrs) | 10 Days (8hrs) | 6 Weeks (3hrs) | Contact US |
Exam Fee
| CCDP Exam | Subjects | Cost in USD |
|---|---|---|
| 300-101 ROUTE | Implementing Cisco IP Routing (ROUTE) | $ 250.00 |
| 300-115 SWITCH | Implementing Cisco IP Switched Networks (SWITCH) | $ 250.00 |
| 300-320 ARCH | Designing Cisco Network Service Architectures (ARCH) | $ 250.00 |